Panasonic ET5T series User Manual
FAQs
86
Problem
Causes / Actions
Sound
No sound is produced
●
Is “Sound mute” active? (p. 10)
●
Is the volume set to the minimum?
Sound level is low or
sound is distorted
sound is distorted
●
Sound signal reception may be deteriorated.
●
Set [MPX] (p. 36) in the Sound Menu to [Mono].
3D
Cannot view 3D images
●
Ensure that [3D Mode Selection] is set to [3D]. (p. 29)
●
Some 3D image signals may not be automatically recognised as 3D images.
Set [3D Mode Selection (Manual)] to match the picture format. (p. 29)
Set [3D Mode Selection (Manual)] to match the picture format. (p. 29)
●
For some people, the 3D images may be difficult to see, or cannot be seen,
especially in users who have a different level of eyesight between the left and
right eyes. Take the necessary steps (wearing glasses etc.) to correct your
eyesight before use.
especially in users who have a different level of eyesight between the left and
right eyes. Take the necessary steps (wearing glasses etc.) to correct your
eyesight before use.
There is something wrong
with the 3D images
with the 3D images
●
Check the setting of [Edge Smoother]. (p. 30)
HDMI
Sound is unusual
●
Set the sound setting of the connected equipment to “2ch L.PCM”.
●
Check the [HDMI1 / 2 / 3 / 4 Input] setting in the Sound Menu. (p. 36)
●
If digital sound connection has a problem, select analogue sound connection.
(p. 82)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
equipment are unusual
when the equipment is
connected via HDMI
●
Check the HDMI cable is connected properly. (p. 73)
●
Turn the TV and equipment off, then turn them on again.
●
Check an input signal from the equipment. (p. 84)
●
Use equipment compliant with EIA/CEA-861/861D.
Network
Cannot connect to the
network
network
●
Check the LAN cable or wireless LAN is connected properly. (p. 57)
●
Check the connections and settings. (p. 57 - 61)
●
Check the network equipment and network environment.
●
The router may not be set to issue IP address automatically. If the network
administrator prefers to allocate an IP address, set an IP address manually.
administrator prefers to allocate an IP address, set an IP address manually.
(p. 59)
●
The router may be using MAC address filtering (security setting).
Confirm the MAC Address of this TV (p. 36) and set the router to use it.
Confirm the MAC Address of this TV (p. 36) and set the router to use it.
●
If the problem persists, consult your Internet Service Provider or
telecommunications company.
telecommunications company.
Cannot select the file
during DLNA operations
during DLNA operations
●
Is the media server of the connected equipment prepared? (p. 56)
●
Check applicable data format. (p. 78, 79)
Cannot operate
VIERA Connect
VIERA Connect
●
Check the connections and settings. (p. 57 - 61)
●
The server or connected line may be busy now.
M
F
R
G
c
d
G
c
d
●
●
●
●
●
●
●
W