Sharp LC-32D44E User Manual

You can freeze a motion picture on the screen.

Press 

3.

Press 

3 again to exit still image.

NOTE
•  When this function is not available, “No still image display 

available.” will display.

•  The still image automatically goes out after 30 minutes.

Teletext broadcasts pages of information and 
entertainment to specially equipped television sets. 
Your TV receives Teletext signals broadcast by a TV 
network, and decodes them into graphical format for 
viewing. News, weather and sports information, stock 
exchange prices and programme previews are among 
the many services available.

Select a TV channel or external input source 
providing the Teletext programme.

Press 

m to display the Teletext.

Press 

m again to display the Teletext on the 

right screen and normal image on the left 
screen.

•  Each time you press 

m, the screen switches as 

shown below.

* May appear in DTV input mode.
•  If you select a programme with no Teletext signal, 

“No Teletext available.” displays.

•  The same message displays during other modes if no 

Teletext signal is available.

NOTE
•  Teletext will not work if the selected signal type is RGB. 

(See page 19.)

You can display the time information included in the 
DTV and Teletext broadcasts.

NOTE
•  Skip step 1 if receiving DTV broadcasts.

Select a TV channel providing Teletext 
information. (The time information is 
automatically captured.)

Press 

p. The channel display will appear on 

the TV.

Press 

p again within the several seconds that 

the channel display is on the screen.

 

Time information will display below the channel 
display for several seconds.

Even when you change the TV channel, you can 
display the time information with steps 2 and 3 
above.

NOTE
•  The time display cannot be stored once the power is 

turned off. When you turn on the power, perform steps 1 to 
4 again.

•  If acquired successfully, the time information will appear in 

the upper-right corner of the screen by pressing MENU.

r/s)

Increase or decrease the page number.

Select a group or block of pages displayed in 
the coloured  brackets at the bottom of the 
screen by pressing the corresponding Colour 
(Red/Green/Yellow/Blue) on the remote 
control unit.

Directly select any page from 100 to 899 by 
using 0–9.

k (Reveal 
hidden Teletext)

Reveal or hide hidden information such as an 
answer to a quiz.

3 (Freeze/
Hold)

Stop updating Teletext pages automatically or 
release the hold mode. 

[ (Subtitle for 
Teletext)

Display the subtitle or exit the subtitle screen.
•  Subtitle will not be displayed when the 

service does not contain the subtitle 
information.

1 (Subpage)

Reveal or hide subpages.
•  Red button: Move to the previous subpage.
•  Green button: Move to the following 

subpage.

•  These two buttons are shown on the screen 

by the signs 

l and k.

User for LC-32D44E:
•  Subtitle is set to off when the power is 

turned on.

User for LC-32D44S:
•  Subtitle is set to on when the power is 

turned on.

LC-32D44E-gb.indd   21

LC-32D44E-gb.indd   21

2008/02/21   9:44:46

2008/02/21   9:44:46