Sharp LC-32DH57S User Manual

This function enables the screen to be automatically 
adjusted to its best possible condition when the analogue 
terminals of the TV and PC are connected with a 
commercially available DVI/RGB conversion cable, etc.

“Auto Sync.” may fail if the PC image has low resolution, has 
unclear (black) edges, or is moved while executing “Auto 
Sync.”.
Be sure to connect the PC to the TV and switch it on before 
starting “Auto Sync.”.
“Auto Sync.” can be executed only when inputting analogue 
signals through the EXT 4 terminal.

•

•

•

Ordinarily you can easily adjust the picture as necessary 
to change image position using “Auto Sync.”. In some 
cases, however, manual adjustment is needed to 
optimise the image.

Press 

a/b to select the specific 

adjustment item.

Press 

c/d to adjust the item to the 

desired position.

H-Pos. [ 0] -30

-20

-15

-15

b30

b20

b15

b15

V-Pos.

Clock

Phase

[-5]

[ 0]

[ 0]

Centres the image by moving it to the left or 
right.

Centres the image by moving it up or down.

Adjusts when the image flickers with vertical 
stripes.

Adjusts when characters have low contrast or 
when the image flickers.

For resetting all adjustment items to the factory preset values, 
press 

a/b to select “Reset”, and then press ;.

“Clock” and “Phase” in the “Fine Sync.” menu can be adjusted 
only when inputting analogue signals through the EXT 4 
terminal.

•

•