Sony STR-DB895D User Manual
O
ther O
p
e
ratio
ns
masterpage:Right
lename[E:\SEM_Janet\Data_DB895D\J9050665_2598514111DB895DCEL\2598514111\GB07
TH_STR-DB895D-CEL.fm]
49
GB
model name1[STR-DB895D]
[2-598-514-11(1)]
You can select the front speaker system you
want to use.
want to use.
Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the front speaker
system you want to use.
repeatedly to select the front speaker
system you want to use.
The selected speaker system indicator lights up
in the display. To turn off the speaker output,
press SPEAKERS (OFF/A/B/A+B) repeatedly
until the “SP A” and “SP B” indications in the
display turn off.
in the display. To turn off the speaker output,
press SPEAKERS (OFF/A/B/A+B) repeatedly
until the “SP A” and “SP B” indications in the
display turn off.
* (Models of area code CEK only)
If you connect speakers to both the SPEAKERS
FRONT A and B terminals, connect speakers with a
nominal impedance of 16 ohms or higher.
FRONT A and B terminals, connect speakers with a
nominal impedance of 16 ohms or higher.
(Models of area code CEL only)
For details on selecting the IMPEDANCE
SELECTOR and connecting the appropriate
speakers, refer “Speaker impedance” (page 16).
For details on selecting the IMPEDANCE
SELECTOR and connecting the appropriate
speakers, refer “Speaker impedance” (page 16).
Before you begin, make sure you have
connected all components properly.
connected all components properly.
Recording on an audio tape or
MiniDisc
MiniDisc
You can record on a cassette tape or MiniDisc
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
1
Select the component to be recorded.
2
Prepare the component for playing.
For example, insert a CD into the CD
player.
player.
3
Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
recording deck and adjust the
recording level, if necessary.
4
Start recording on the recording deck,
then start playback on the playback
component.
then start playback on the playback
component.
Notes
• You cannot record a digital audio signal using a
component connected to the analog MD/TAPE OUT
jacks. To record a digital audio signal, connect a
digital component to the DIGITAL OPTICAL MD/
TAPE OUT jack.
jacks. To record a digital audio signal, connect a
digital component to the DIGITAL OPTICAL MD/
TAPE OUT jack.
• Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• The analog audio signals of the current input is
output from the MD/TAPE OUT jacks.
• The signals input to the MULTI CH IN jacks are not
output from the MD/TAPE OUT jacks even when
MULTI CH IN is being used. The analog audio
signals of the current or previously used input are
output.
MULTI CH IN is being used. The analog audio
signals of the current or previously used input are
output.
• No signals are output from DIGITAL OPTICAL
MD/TAPE OUT jack when ANALOG DIRECT
function is being used. The digital circuitry power is
cut off to ensure superior sound quality when
“D.PWR XXX” is set to “D.PWR OFF”.
function is being used. The digital circuitry power is
cut off to ensure superior sound quality when
“D.PWR XXX” is set to “D.PWR OFF”.
• No signals are output from DIGITAL OPTICAL
MD/TAPE OUT jack when TUNER (DAB, FM or
AM band) is selected.
AM band) is selected.
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the sources.
from the sources.
Selecting the speaker
system
system
To select
Indicator
lights up in the
display
lights up in the
display
The speakers connected to the
SPEAKERS FRONT A terminals.
SPEAKERS FRONT A terminals.
SP A
The speakers connected to the
SPEAKERS FRONT B terminals.
SPEAKERS FRONT B terminals.
SP B
The speakers connected to both the
SPEAKERS FRONT A and B
terminals (parallel connection).*
SPEAKERS FRONT A and B
terminals (parallel connection).*
SP A and SP B
Recording
continued
GB01COV_STR-DB895D-CEL.book Page 49 Wednesday, June 15, 2005 9:28 AM