Sony 46EX700 User Manual

Page of 42
KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 
16
52EX700/52EX701/52EX703/60EX700/60EX701/60EX703
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifi es per un trame et 
une marque 
!
 sont critiques pour la securite. 
Ne les remplacer que par une piece portant le 
numero specifi e.
NOTE: The components identifi ed by shading 
and 
!
 mark are critical for safety. Replace only 
with part number specifi ed. 
NOTE: The components identifi ed by a red outline and a   mark contain 
confi dential information. Specifi c instructions must be adhered to whenever 
these components are repaired and/or replaced. 
See Appendix A: Encryption Key Components in the back of this manual. 
 
REF. NO.  
PART NO. 
DESCRIPTION 
[ASSEMBLY INCLUDES]
 
REF. NO.  
PART NO. 
DESCRIPTION 
[ASSEMBLY INCLUDES]
(Check the 
 website for any additional service related issues for this model.)
A   Remove screws from Power Boards
 
4 from GE3-A Board (KDL-32EX700/40EX700/40EX703 Only)
 
4 from GE2-B Board (KDL-46EX700/46EX701/46EX703/52EX700/52EX701/52EX703 Only)
 
5 from GE2-A Board (KDL-60EX700/60EX701/60EX703 Only)
B   Disconnect 5 connectors from Power Boards
C   Remove 4 screws from BAL Board
D   Disconnect 5 connectors from BAL Board
E   Slide Side Jack Bracket to right-side to remove from BAL Board
F   Lift HMS2 Board to detach from Bezel
G   Slide-out Lens to detach from Bezel
H   Carefully Lift up Panel to remove from Bezel
1-4.  GE3-A/GE2-A/GE2-B (POWER) BOARDS, BAL BOARD, HMS2 BOARD, 
AND LCD PANEL REMOVAL
 151  X-2541-866-1  BEZEL(32) 
ASSY
 
 
 
(KDL- 32EX700 ONLY)
 151  X-2541-867-1  BEZEL(40) 
ASSY
 
 
 
(KDL- 40EX700 ONLY)
 151  X-2547-169-1  BEZEL(40) 
ASSY
 
 
 
(KDL- 40EX703 ONLY)
 
152 
A-1736-860-A 
HMS2 BOARD, MOUNTED
 153  1-856-068-11  LENS
 154  N/A 
LCD 
PANEL
 
 
FOR ALL LCD PANEL PART NUMBER INFORMATION
 
 
REFER TO THE LCD PANELS SERVICE MANUAL
 
155 
4-171-117-01 
BRACKET, SIDE JACK M
     
  156 
A-1763-462-A 
BAL BOARD, COMPLETE
 
NOTE: For BAL Board replacement, please refer to section 
 
2-2. Setting the Destination after Replacing the BAL Board or LCD Panel.
 
NOTE: Final software is not installed on this BAL Board. Install the update 
 
after replacing this board using the instructions provided with the software.
 
157 
1-474-213-11 
GE3-A (POWER) BOARD, COMPLETE
157
156
155
152
153
151
154
A
B
D
E
G
F
H
C
1-4-1. KDL-32EX700/40EX700/40EX703
 
 
2-580-592-01 
SCREW, +PSW M3X8