Sony WRR-855A User Manual
6
(GB)
Note
Be sure to check the operating voltage and polarity when
connecting to a power source.
connecting to a power source.
qf
Betacam attachment knob
Used to fix the unit to a Betacam.
For attaching the unit to a Betacam, see page 13.
For attaching the unit to a Betacam, see page 13.
qg
OUTPUT connector (XLR 3-pin, male)
Supplies audio signals. You can connect this to the
microphone input connector of a Betacam, mixer, tape
recorder or other similar equipment.
microphone input connector of a Betacam, mixer, tape
recorder or other similar equipment.
Note
When connecting to an audio mixer which has a Phantom
powering capability for microphones, it is recommended to
use the mixer with the Phantom power OFF.
powering capability for microphones, it is recommended to
use the mixer with the Phantom power OFF.
Parts Identification
Pin assignment
1: GND
2: HOT
3: COLD
2: HOT
3: COLD
Pin assignment
1: GND
2: NC
3: NC
4: +12 V
2: NC
3: NC
4: +12 V
2
3
4
1
2
3
4
1
9
+ button /
0
– button
Press to select the group and channel numbers to be
received.
See “Settings” on pages 10 and 11.
received.
See “Settings” on pages 10 and 11.
qa
AF (audio frequency level) indicator
Lights when an audio signal greater than the reference level
is output.
is output.
qs
RF (radio frequency input level) indicator
Displays the strength of the input signal.
Lights in green: Higher than 25 dBµ
Lights in red: 10 to 25 dBµ
Goes off: Lower than 10 dBµ
Lights in green: Higher than 25 dBµ
Lights in red: 10 to 25 dBµ
Goes off: Lower than 10 dBµ
BTA-801 Portable Tuner Mount Adapter
(Optional)
(Optional)
qd
DC 12V IN (power input) connector
Connect to an external power supply (DC 10 to 17 V) of a
Betacam using the DC power cable supplied with the
BTA-801.
Betacam using the DC power cable supplied with the
BTA-801.
1
2
3