Sony 32EX700 User Manual

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 29

52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

Use the following instructions to restore the User Adjustments 

and Channel Memory settings to the preset factory conditions.

1.  While holding down the   on the Remote Commander, 

press the POWER button on the TV Switch Unit of the set.

 

The set restarts and displays the Initial Setup screen. This 

may take several minutes.

1.  TV must be in Standby Mode. (POWER off).

2.  Press the following buttons on the Remote Commander 

within a second of each other: 

DISPLAY

 

 Channel 

5

 

 Volume 

+

 

 

POWER

.

3.  If necessary, press JUMP  or OPTIONS  to go to DIGITAL 

mode.

4. Press 

8

.

 

“SERVICE” changes to green RST. 

5. Press 

MUTING .

 

RST executes the command and displays EXE.

6. Press 

0

 .

 

EXE-RST displays green, then red indicating the TV is 

writing the data.

7.   When the process is complete the green SERVICE text 

displays and the LED display as shown below: 

TIMER

Standby

POWER

TIMER

Standby

POWER

8.    Cycle AC Power (Unplug and Plug AC Cord from the 

AC Outlet). 

9.  The set restarts and displays the Initial Setup screen. 

This may take several minutes.