Sony KDL-32R41xB User Manual

Page of 32
26
GB
Troubleshooting
When the LED indicator is flashing red, count 
how many times it flashes (interval time is 
three seconds).
If the LED indicator flashes red, reset the TV by 
disconnecting the AC power cord (mains lead) 
from the TV for two minutes, then turn on the 
TV. If the problem persists, contact your dealer 
or Sony service centre with the number of times 
the LED indicator flashes red (interval time is 
three seconds). Press 
/ on the TV to turn it 
off, disconnect the AC power cord (mains lead), 
and inform your dealer or Sony service centre.
When the LED indicator is not flashing, check 
the items as follows.
If the problem persists, have your TV serviced by 
qualified service personnel.
No picture (screen is dark) and no sound
Check the antenna/cable connection.
Connect the TV to the AC power outlet (mains 
socket), and press 
/ on the TV or remote 
control.
No picture or no menu information from 
equipment connected to the video input jack 
appears on the screen
Press 
 to display the connected equipment 
list, then select the desired input.
Check the connection between the optional 
equipment and the TV.
Double images or ghosting
Check the antenna/cable connection, location or 
direction.
Only snow and noise appear on the screen
Check if the antenna is broken or bent.
Check if the antenna has reached the end of its 
serviceable life (three to five years in normal use, 
one to two years at the seaside).
Distorted picture (dotted lines or stripes)
Keep the TV away from electrical noise sources 
such as cars, motorcycles, hair-dryers or optional 
equipment.
When installing optional equipment, leave some 
space between the optional equipment and the 
TV.
Check the antenna/cable connection.
Keep the antenna cable away from other 
connecting cables.
Picture or sound noise when viewing a TV 
channel
Adjust [AFT] (Automatic Fine Tuning) to obtain 
better picture reception.
Tiny black points and/or bright points appear 
on the screen
The picture of a display unit is composed of 
pixels. Tiny black points and/or bright points 
(pixels) on the screen do not indicate a 
malfunction.
Picture contours are distorted
Change the current setting of [Film Mode] to 
other settings (page 15).
No colour on programmes
No colour or irregular colour when viewing a 
signal from the Y, P
B
, P
R
 jacks of 
/
Check the connection of the Y, P
B
, P
R
 jacks of 
/
 and check if each jacks are firmly seated 
in their respective jacks.
No picture from the connected equipment 
appears on the screen
Turn the connected equipment on.
Check the cable connection.
Press 
 to display the connected equipment 
list, then select the desired input.
Correctly insert the memory card or other storage 
device in the digital still camera.
Use a digital still camera memory card or other 
storage device that has been formatted according 
to the instruction manual supplied with the digital 
still camera.
Operations are not guaranteed for all USB 
devices. Also, operations differ depending on the 
features of the USB device and the video being 
played.
Cannot select the connected equipment on 
the menu or cannot switch the input
Check the cable connection.
Additional Information
Picture