Sony KDL-32R41xB User Manual

Page of 32
3
GB
GB
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this manual thoroughly and 
retain it for future reference.
Note
• The “x” that appears in the model name corresponds to a 
numeric digit, related to design, colour or TV system.
• Before operating the TV, please read “Safety information” 
• Images and illustrations used in Quick Start Guide and this 
manual are for reference only and may differ from actual 
product appearance.
Location of the identification label
Labels for Model No., Production Date (month/year) and Power 
Supply rating (in accordance with applicable safety regulation) are 
located on the rear of the TV or package.
Labels for mains adaptor Model No. and Serial No. are located at 
the bottom of mains adaptor.
WARNING
TO PREVENT THE 
SPREAD OF FIRE, KEEP 
CANDLES OR OTHER OPEN 
FLAMES AWAY FROM THIS 
PRODUCT AT ALL TIMES.
NOTICE FOR CUSTOMERS IN THE UNITED 
KINGDOM
A moulded plug complying with BS1363 is fitted to this equipment 
for your safety and convenience.
Should the fuse in the plug supplied need to be replaced with the 
same rating of fuse approved by ASTA or BSI to BS 1362 (i.e., 
marked with
 
 
or
 
) must be used.
If the plug supplied with this equipment has a detachable fuse 
cover, be sure to attach the fuse cover after you change the fuse. 
Never use the plug without the fuse cover. If you should lose the 
fuse cover, please contact your nearest Sony service station.
How to replace the fuse
Open the fuse compartment with a blade screwdriver, and 
replace the fuse.
Please refer to the illustration that actually equipped with the 
product.
Notice for Wireless Signal
Hereby, Sony Corporation declares that this unit is in 
compliance with the essential requirements and 
other relevant provisions of Directive 1999/5/EC.
For details, please access the following URL:
http://www.compliance.sony.de/
WARNING
Batteries must not be exposed to excessive heat such as 
sunshine, fire or the like.
Installation/Set-up
Install and use the TV set in accordance with the instructions 
below in order to avoid any risk of fire, electrical shock or damage 
and/or injuries.
Installation
• The TV set should be installed near an easily accessible AC 
power outlet (mains socket).
• Place the TV set on a stable, level surface to avoid it from falling 
down and cause personal injury or damage to the TV.
• Only qualified service personnel should carry out wall 
installations.
• For safety reasons, it is strongly recommended that you use 
Sony accessories, including: 
Wall-Mount Bracket
 SU-WL450
• Be sure to use the screws supplied with the Wall-Mount Bracket 
when attaching the mounting hooks to the TV set. The supplied 
screws are designed as indicated by illustration when measured 
from the attaching surface of the mounting hook.
The diameter and length of the screws differ depending on the 
Wall-Mount Bracket model.
Use of screws other than those supplied may result in internal 
damage to the TV set or cause it to fall, etc.
FUSE
IMPORTANT NOTICE
This product has been manufactured by or on behalf of Sony 
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. 
Inquiries related to product compliance based on European 
Union legislation shall be addressed to the authorized 
representative, Sony Deutschland GmbH, Hedelfinger Strasse 
61, 70327 Stuttgart, Germany. For any service or guarantee 
matters, please refer to the addresses provided in the separate 
service or guarantee documents.
Safety information
Screw (supplied with the 
Wall-Mount Bracket)
Mounting Hook
Hook attachment on rear 
of TV set
8 ~ 10 mm