Control, you can display its screen on your large TV screen.
You can use this “One-touch mirroring” function with a One-touch mirroring compatible device

(e.g. some models of Xperia).

Steps

Set the NFC* setting of your smartphone to on.

* NFC: Near Field Communication

Touch the NFC detection area of the smartphone to the mark on the Touchpad Remote
Control for about 2 seconds.
Remove the smartphone from the remote when the device confirmation completion message

appears at the bottom of the TV screen.
When the smartphone is connected with the TV, the screen displayed on the smartphone will

also be displayed on the TV.

To optimise the One-touch mirroring function (for experts)

When the standby screen for Screen mirroring is displayed, press the OPTIONS button, then

select [Optimise One-touch mirroring].
[Off]: Normally use this option. It uses the same wireless channel at 2.4GHz as the wireless router

(or access point) is using.
[Auto]: This option uses a wireless channel that may improve video streaming quality. When you

select this setting, the wireless connection between the TV and the wireless router (access point)

is disconnected during One-touch mirroring, therefore communication via the Internet (such as an

incoming call) is stopped.
When your TV is connected to a wireless router (or access point) at 2.4GHz, you can optimise the

150