Dynex DX-48D510NA15 User Manual
Dynex 48" LED TV
25
DX-48D510NA15
www.dynexproducts.com
DVI (same as HDMI but requires an audio connection)
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to
the DVI OUT jack on the computer.
3 Connect the other end of the cable to the HDMI1 (DVI) jack on the side of your TV.
4 Connect an audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT
(headphone) jack on the computer.
5 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
6 Press INPUT to open the INPUT SOURCE list.
7 Press or to select HDMI1, then press ENTER.
8 Adjust the display properties on the computer, if necessary.
Note
You must use the HDMI1 (DVI) jack to connect a computer using DVI. If you
use another HDMI jack, you will not hear sound from the TV speakers.
use another HDMI jack, you will not hear sound from the TV speakers.
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio
output is analog.
output is analog.
HDMI cable
connector
Audio cable
connector
HDMI1 (DVI)
jack
PC/DVI
AUDIO IN
jack
On your TV
HDMI cable with
HDMI-DVI adapter
Side of TV
Audio cable
Back of TV