Andrew L4TDM-PS User Manual
716 DIN Male Positive Stop™ for 1/2 in LDF450A cable
L4TDM-PS
CHARACTERISTICS
General Specifications
Interface
716 DIN Male
Body Style
Straight
Brand
HELIAX® | Positive Stop™
Mounting Angle
Straight
Electrical Specifications
Connector Impedance
50 ohm
Operating Frequency Band
0 – 8800 MHz
Cable Impedance
50 ohm
3rd Order IMD
120 dBm @ 910 MHz
3rd Order IMD Test Method
Two +43 dBm carriers
RF Operating Voltage, maximum (vrms) 1415.00 V
dc Test Voltage
4000 V
Outer Contact Resistance, maximum
1.50 mOhm
Inner Contact Resistance, maximum
0.80 mOhm
Insulation Resistance, minimum
5000 MOhm
Average Power
1.1 kW @ 900 MHz
Peak Power, maximum
40.00 kW
Insertion Loss, typical
0.05 dB
Shielding Effectiveness
110 dB
Product Specifications
©2010 CommScope, Inc. All rights reserved.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change.
See www.commscope.com/andrew for the most current information.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change.
See www.commscope.com/andrew for the most current information.
page 1 of 3
6/1/2010