Peavey E20 User Manual
10
11
18
Rear Panel
POWER SWITCH
On/Off switch. The red pilot light illuminates when the unit is turned on.
On/Off switch. The red pilot light illuminates when the unit is turned on.
IEC MAINS CONNECTOR
This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings
for the intended operating voltage is included in the carton. The mains cord should be connected to the
amplifier before connecting to a suitable AC outlet.
This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings
for the intended operating voltage is included in the carton. The mains cord should be connected to the
amplifier before connecting to a suitable AC outlet.
U.S. Domestic AC Mains Cord
The mains cord supplied with the unit is a heavy-duty, three conductor type with a conventional 120VAC
plug with ground pin. If the outlet used does not have a ground pin, a suitable adapter should be used
and the third wire grounded properly. All apparatus with class 1 construction shall be connected to a
mains socket with a protective earthing connection.
The mains cord supplied with the unit is a heavy-duty, three conductor type with a conventional 120VAC
plug with ground pin. If the outlet used does not have a ground pin, a suitable adapter should be used
and the third wire grounded properly. All apparatus with class 1 construction shall be connected to a
mains socket with a protective earthing connection.
Never break off the grounding pin on any equipment. It is provided for your safety. The use of extension
cords should be avoided but, if necessary, always use a three wire type. Always use a qualified
electrician to install any electrical equipment. To prevent the risk of shock or fire hazard, always be sure
the amplifier and all associated equipment is properly grounded.
cords should be avoided but, if necessary, always use a three wire type. Always use a qualified
electrician to install any electrical equipment. To prevent the risk of shock or fire hazard, always be sure
the amplifier and all associated equipment is properly grounded.
NOTE: For UK Only
If the colors of the wires in the mains lead of this unit do not correspond with the colored markings
identifying the terminals in your plug, proceed as follows: (1) The wire that is colored green and yellow
must be connected to the terminal that is marked by the letter E, the earth symbol, colored green or
green and yellow. (2) The wire that is colored blue must be connected to the terminal that is marked with
the letter N or the color black. (3) The wire that is colored brown must be connected to the terminal that
is marked with the letter L or the color red.
If the colors of the wires in the mains lead of this unit do not correspond with the colored markings
identifying the terminals in your plug, proceed as follows: (1) The wire that is colored green and yellow
must be connected to the terminal that is marked by the letter E, the earth symbol, colored green or
green and yellow. (2) The wire that is colored blue must be connected to the terminal that is marked with
the letter N or the color black. (3) The wire that is colored brown must be connected to the terminal that
is marked with the letter L or the color red.
11
10