Sony XDP-210EQ User Manual

EQ

   Tuning

1 MEMORY1

SUR EQ

EQ

 

1

 MEMORY1

  F 3‚ +12

SUR EQ

You can select the stored equalizer curve
(MEMORY1 to MEMORY9) or an unadjusted
curve (FLAT).

Press (SOURCE) to select a source (radio,
tape, CD or MD etc.).

Press (SOUND) repeatedly until “EQ”
appears.

Rotate/press (+) or (–) to select the
stored equalizer curve.

After three seconds, the display goes back
to the normal playback mode.

Tip
To adjust the stored equalizer curve further, press
(SOUND) for two seconds within three seconds after
following step 3 above. Then go to step 4 to 8 of “Setting
and storing the equalizer curve.”

EQ

    

1 MEMORY1

SUR EQ

You can adjust the 21 band frequencies to
make an equalizer curve, and store up to nine
curves.

30 Hz, 45 Hz, 62 Hz, 90 Hz, 130 Hz, 190 Hz,
270 Hz, 400 Hz, 580 Hz, 840 Hz, 1.2 kHz,
1.7 kHz, 2.5 kHz, 3.6 kHz, 5.2 kHz, 7.5 kHz,
11 kHz, 16 kHz

90 Hz, 840 Hz, 7.5 kHz

Press (SOURCE) to select a source (radio,
tape, CD or MD etc.).

Press (SOUND) for two seconds.

Press (SOUND) repeatedly until “EQ”
appears.

Rotate/press (+) or (–) to select an
equalizer curve.

1 Press (4) (n) to select the desired

F30 n F45 n .........n F16k n
R90 n R840 n R7.5k

If you press (1) (N), the frequency
appear in the reverse order.

2 Rotate/press (+) or (–) to adjust the

3 Repeat steps 1 and 2 to adjust the