Sony XDP-210EQ User Manual

Page of 82
6
EN
Selecting the listening
position
 — Sound Control Mode
You can set the time for the sound to reach the
listeners from the speakers.
The unit can simulate a natural sound field so
that you can feel as if you are in the center of
the sound field wherever you sit in the car.
Display
window
ALL
FRONT
FRONT R
FRONT L
REAR
Center of
soundfield
Normal setting
(1 + 2 + 3)
Front part
(1 + 2)
Right front (2)
Left front (1)
Rear part (3)
2
1
3
1
Press (SOUND) momentarily until “POS”
appears.
2
Rotate/press (+) or (–) to select the
desired listening position.
The listening positions appear in the order
shown above.
After three seconds, the display goes back to
the normal playback mode.
Tip
To adjust the listening position further, press 
(SOUND)
for two seconds within three seconds after following step 2
above. Then go to step 4 to 8 of “Adjusting the listening
position.”
POS
    
  All
SUR EQ
POS
   All
 L       R
SUR EQ
POS
   All
 R       F
SUR EQ
POS
   Tuning
  All
SUR EQ
Adjusting the listening
position 
— Sound Tuning Mode
Note
When you adjust the listening position, set the balance and
fader control to the center position.
1
Press (SOUND) for two seconds.
2
Press (SOUND) repeatedly until “POS”
appears.
3
Rotate/press (+) or (–) repeatedly until
the desired listening position appears.
4
Press (4) (n).
5
Rotate/press (+) or (–) to adjust the
center of the sound field to the left or
right. Then set the center of the sound
field.
(+): Center moves to the R (right).
(–): Center moves to the L (left).
6
Press (4) (n).
7
Rotate/press (+) or (–) to adjust the
center of the sound field to the front or
rear.
(+): Center moves to the F (Front).
(–): Center moves to the R (Rear).
8
Press (SOUND) for two seconds.
When the listening position setting is
complete, the normal playback mode
appears.