LOEWE 32 User Manual

9 -

This TV set is intended exclusively for the reception and reproduction of
video and audio signals and designed for the home and office. It may
not be used in rooms with high humidity (e.g. bathrooms, saunas) or
high dust concentration (e.g. workshops). The manufacturer‘s warranty is
only valid for use in the specified permissible environment.

If the set is used outdoors then ensure that it is protected against mois-

ture (rain, splashing water, or dew). High humidity and dust concentration
cause creep currents in the set. This can cause electric shocks or fires.

If you have brought the set into a warm environment from the cold, then
wait for about 1 hour before switching it on to avoid formation of con-

densation.

Do  not  place  any  objects  filled  with

liquid or burning candles on the de-
vice. Protect the set against dripping
and splashing water.

Never  place  the  TV  set  in  a  position
where it is exposed to vibrations. This
can lead to material overload.

When  rotating  the  TV  set  there  is  a

danger  of  crushing  between  the  TV
housing  and  the  table  stand.  Makes
sure that your fingers or other objects
are not in this area when rotating the TV set.

Only transport the device in vertical position. Grasp the device on the
upper and lower edges of the housing.

The LCD screen is made of glass or plastic and can break if not handled
properly.
If the LCD screen is damaged and liquid crystal is leaking, wear rubber
gloves for handling the TV set. If there is skin contact immediately wash
thoroughly with water.

The wrong voltage can damage the set. This equipment must only be
connected to a mains power supply which has the same voltage and
frequency  as  that  specified  on  the  rating  plate;  use  the  power  cable
provided. The mains plug of the TV set must be easily accessible so that
the device can be disconnected from the mains at any time. When you
unplug the mains plug, do not pull on the cable rather pull on the plug
housing. The cable in the mains plug could be damaged and cause a

short circuit the next time it is plugged in.
Lay out the power cable in such a manner that it cannot be damaged.
The power cable may not be kinked or laid over sharp edges, stepped
on or exposed to chemicals; The latter also applies for the entire equip-
ment. A power cable with damaged insulation can cause electrical shock 
and is a fire hazard.

The vent slots on the rear panel of the set must always be kept free.
Please do not place newspapers or cloths on/over the TV.

At least 10 cm clearance must be
left  at  the  sides  and  top  for  air
circulation if the TV set is placed or
hung in a cabinet or a shelf.

Like any electronic device, your TV
set  requires  air  for  cooling.  Ob-
struction of the air circulation can
cause fires.

The set is suitable for different instal-
lation solutions. See the instructions
for assembly for the different instal-
lation solutions.

Stand the TV set with the table or floor stand only on a level, sturdy, 

horizontal base. Particularly ensure that the set does not protrude to the
front when placed in or on pieces of furniture.

Set up the device where it is not exposed to direct sunlight and where it
is not exposed to additional warming through heating elements.

Prevent metal items, needles, paper clips, liquids, wax, or similar items,
from getting into the interior of the device through the vent slots in the
rear panel. Such objects can cause short circuits in the set, which could
possibly cause a fire.

If something should get into the interior of the set then immediately
unplug the mains plug of the device and contact customer service for
more information.

C   O  

 N   N  

 E   C   

T

C   O   N   N   E   C   T