Insignia 40D510MX15 User Manual
65
NS-40D510MX15 Insignia 40" LED TV
www.insigniaproducts.com
4 Press
S
or
T
to select On (turns on the input
sensor) or Off (turns off the input sensor).
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Maintenance
• Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
may malfunction. Your TV works best in
temperatures that are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F
• Working temperatures are 41° to 104°F
(5° to 40°C).
• Do not place your TV in direct sunlight or near a
heat source.
Cleaning the TV cabinet
Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
cabinet with the cloth. Use a clean cloth to dry the
cabinet.
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
cabinet with the cloth. Use a clean cloth to dry the
cabinet.
Cleaning the TV screen
Clean the screen with a soft, lint-free cloth.
Troubleshooting
Restoring settings to the defaults
When you restore default settings, all the settings
you have customized (including parental controls)
are reset.
you have customized (including parental controls)
are reset.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight Reset to Default, then
press ENTER. The SETTINGS · RESET TO DEFAULT
menu opens.
menu opens.
4 Press
S
or
T
to highlight Reset to Default, then
press ENTER. A message asks if you want to
reset all TV settings to the default settings.
reset all TV settings to the default settings.
5 Press
S
or
T
to select Yes (to reset) or No (to not
reset), then press ENTER.
If you select Yes, your TV turns off, then turns on
again. The TV SETUP wizard opens.
again. The TV SETUP wizard opens.
6 Go through the TV SETUP wizard. For more
information, see “Turning on your TV for the first
time” on page 36.
time” on page 36.
Viewing system information
You may need to view system information during
troubleshooting.
troubleshooting.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight System Info, then
press ENTER. The SETTINGS · UPDATE FIRMWARE
menu opens.
menu opens.
Warning
Do not try to repair your TV yourself.
Contact authorized service personnel.
Contact authorized service personnel.