Sony DSM-T1 User Manual
10
1,6
2,4
3,4
5
IN1
IN2
EXT
525
625
36M
18M
7/8
3/4
ALOG
AEB/EBU
SDI
REF
ALARM
MENU
ITEM
RESET
ENTER
INPUT
SEL
FEC
RATE
FREQ
BW
SDI
AUDIO
VIDEO
STD
Menu Setup
A menu is provided to set up the operating conditions
of the unit. Menu items include basic items, items
about the optional boards, items about the front panel,
etc.
of the unit. Menu items include basic items, items
about the optional boards, items about the front panel,
etc.
For more information about menu items, see “ Menu List”
(page 12).
(page 12).
A “current bank” and 8 “menu banks” are provided
with the unit. The current bank can be used to store
current parameters. The menu banks can be used to
store up to 8 sets of parameters. Saving/recalling
frequently used parameters in/from menu banks allows
faster setting up of the unit’s operating conditions.
with the unit. The current bank can be used to store
current parameters. The menu banks can be used to
store up to 8 sets of parameters. Saving/recalling
frequently used parameters in/from menu banks allows
faster setting up of the unit’s operating conditions.
Initial Display
Switching the power on causes the selected parameter
of “15: IF OUT LEVEL” and “16: CARRIER” on the
menu to appear in the display window.
of “15: IF OUT LEVEL” and “16: CARRIER” on the
menu to appear in the display window.
Changing the Parameters
Follow the procedure below to change the parameters
and save them in the current bank.
and save them in the current bank.
1
Press the MENU button.
The back lighting for the MENU button lights up,
and the menu appears in the display window.
and the menu appears in the display window.
2
Select a menu item to be changed using the ITEM
 or µ button.
 or µ button.
3
Change the parameters using the
4 or $ button.
Use the
“ or ” button to move a digit to the left or
right.
4
To change the parameters of other items, repeat
steps 2 and 3.
steps 2 and 3.
5
Press the ENTER button.
The changed parameters are saved in the current
bank. The contents of the current bank are saved
even after the power is turned off.
bank. The contents of the current bank are saved
even after the power is turned off.
To cancel changing parameters
Press the MENU button before pressing the
ENTER button.
ENTER button.
6
Press the MENU button.
The back lighting for the MENU button turns off,
and the unit exits the menu.
and the unit exits the menu.
To return the contents of the current bank
to the factory setting
to the factory setting
Follow the procedure below.
1
Press the MENU button.
The back lighting for the MENU button lights up,
and the menu appears in the display window.
and the menu appears in the display window.
2
Select “93: FACTORY SET” using the ITEM
 or
µ button.
3
Press the ENTER button.
The contents of the current bank return to the
factory setting.
factory setting.
To cancel returning to the factory setting
Press the MENU, ITEM
 or µ button before
pressing the ENTER button.
4
Press the MENU button.
The back lighting for the MENU button turns off,
and the unit exits the menu.
and the unit exits the menu.