Toshiba U600D User Manual
User ’s Manual
4-3
Operating Basics
How to swipe the finger
Using the following steps when swiping fingers for fingerprint registration or
authentication will help to minimize authentication failures:
authentication will help to minimize authentication failures:
1. Align the first joint of the finger to the center of the sensor. Lightly touch the
sensor and swipe finger levelly towards you.
2. While lightly touching the sensor, swipe the finger towards you until the sensor
surface becomes visible.
3. Ensure the center of the fingerprint is on the sensor when swiping the finger.
n
Avoid swiping with the finger stiff or pressed-on too hard:
Fingerprint reading may fail if the center of the fingerprint is not touching
on the sensor, or when finger is swiped while pressing hard. Make sure
that the center of the fingerprint is touching the sensor before swiping.
Fingerprint reading may fail if the center of the fingerprint is not touching
on the sensor, or when finger is swiped while pressing hard. Make sure
that the center of the fingerprint is touching the sensor before swiping.
n
Confirm the center of the fingerprint whirl before swiping:
The thumb’s fingerprint has a bigger whirl, which is prone to misalignment
and distortions. This will cause difficulty in registration and a drop in the
authentication success rate. Always confirm the center of the fingerprint
whirl so that it is swiped along the centerline of the sensor.
The thumb’s fingerprint has a bigger whirl, which is prone to misalignment
and distortions. This will cause difficulty in registration and a drop in the
authentication success rate. Always confirm the center of the fingerprint
whirl so that it is swiped along the centerline of the sensor.
n
When fingerprint reading is not successful:
There is a possibility of authentication failures if the finger is swiped too
quickly or too slowly. Follow the onscreen instructions to adjust the speed
of the swipe.
There is a possibility of authentication failures if the finger is swiped too
quickly or too slowly. Follow the onscreen instructions to adjust the speed
of the swipe.
Slide the finger over the recognition sensor