Sirius Satellite Radio SIR-ALP1 User Manual

Page of 13
Sirius™ Connect USB interface board 
 
Installation Instructions 
 
  Page 1 of 13 
 
Created On Tuesday, March 14, 2006 
This is for the SIR-ALP1 
 
Disclaimers: 
  Modifying the radio may void any outstanding warranty it may have. 
  This product is not affiliated with Sirius Satellite Radio in any way. 
  There are no warranties expressed or implied by purchase of this product.  
  All boards are tested and verified 100% before shipping. 
  While every care has been taken to provide a quality product, I cannot guarantee the board to 
function correctly if installation is not done according to the instructions in this guide.  
  I am not liable for misuse of this product. Misuse includes improper installation, damage to the 
board or radio while trying to install, and illegal use of the modified radio. 
 
Tools needed: 
1. Small Philips screwdriver (p1). 
2. Elbow grease. 
3. A double sided mirror. 
 
Screws already removed to save me some time. 
 
 
 
Using the small Philips screwdriver, remove the 7 screws in the SILVER case. 
 (3 on each side, 1 on top)