Alpine cda-7873 User Manual

8
9

Press and hold the POWER button for more than
3 seconds to turn off the power.

Press the

(Release) button at upper left side

until the front panel pops out.

Grasp the left side of the front panel and pull it
out.

• The front panel may become hot in normal usage

• To protect the front panel, place it in the supplied

First, insert the right side of the front panel into
the main unit. Align the groove on the front panel
with the projections on the main unit.

Push the left side of the front panel until it locks
firmly into the main unit.

NOTE
Before attaching the front panel, make sure that there is
no dirt or dust on the connector terminals and no foreign
object between the front panel and the main unit.

2

1

1

• Controllable with Remote Control (CDA-7873

only)
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine
dealer.
Point the optional remote control transmitter at
the remote control sensor.

Immediately after installing or applying power to the
unit, it should be initialized. Press the RESET switch
with a ballpoint pen or any other pointed object.

Press the POWER button to turn on the unit.

NOTE
The unit can be turned on by pressing any other button
except the eject c and CLK/TITLE button.

The volume level gradually increases to the previous
level you were listening to before the unit was turned
off. Press and hold the POWER button for at least 3
seconds to turn off the unit.

NOTE
The first time power is turned on, the volume will start
from level 12 and the unit will be in the tuner mode with
BBE on.

Remote control sensor