automatically performs the IP address setting and other settings.
When using this unit connected to a network with no DHCP function, make the
settings for the IP address, etc., at “Network” (vpage 86).

• When using this unit, we recommend you use a router equipped with the following

functions:
• Built-in DHCP server

This function automatically assigns IP addresses on the LAN.

• Built-in 100BASE-TX switch

When connecting multiple devices, we recommend a switching hub with a speed
of 100 Mbps or greater.

• Use only a shielded STP or ScTP LAN cable which is easily available at electronics

stores (CAT-5 or greater recommended).

• The normal shielded-type LAN cable is recommended. If a flat-type cable or

unshielded-type cable is used, other devices could be affected by noise.

• When using a WPS (Wi-Fi Protected Setup) compatible router, easy wireless

connection is possible by pressing this unit’s Wi-Fi CONNECT button. (See the
separate “Quick Setup Guide”.)

NOTE

• The types of routers that can be used depend on the ISP. Contact your ISP or a

computer shop for details.

• This unit is not compatible with PPPoE. A PPPoE-compatible router is required if

you have a contract for a type of line set by PPPoE.

• Do not connect an NETWORK connector directly to the LAN port/ Ethernet

connector on your computer.