ONKYO CR-325UKD User Manual

55

• You must set the clock before you can program the tim-

ers.

• Before programming a timer to turn on the radio, you 

must preset the station you want to use. (See pages 46 and 
47.)

• If you don’t operate any buttons for 60 seconds while pro-

gramming a timer, the procedure will be cancelled and 
the previous display will reappear.

If “Clock” appears, you need to set the 
clock (see pages 24, 52, and 53).

7]/

6] buttons to select “Play” or 

If you can’t select “Rec”, make sure that 
your Onkyo cassette deck or MD 
recorder is properly connected to the 
MD/TAPE jacks (see pages 21 and 22) 
and the Input Display is set accordingly 
(see page 27).

or

7]/

6] buttons to select the source, 

You can select the following sources:

FM, AM, TAPE, USB, DOCK, CD 
or DAB.

FM, AM, TAPE, DOCK, CD or 
DAB.

If you selected “Rec”, only “FM”, “AM” 
or “DAB” can be selected as the source.

7]/[6] buttons to select the 

7]/

6] buttons to select “Once” or 

“Every”, and then press [ENTER].
Select “Once” for on-off operation. 
Select “Every” to perform the same oper-
ation every week.