ONKYO CR-505DA User Manual

 

15

 

With 

 (Remote Interactive) you can control your 

-

compatible Onkyo cassette tape deck or MD recorder with 
the CR-505DAB’s remote controller, and use the following 
special  

functions:

 

■

 

When you turn on a component connected via 

 while the 

CR-505DAB is in Standby, the CR-505DAB automatically 
turns on and selects that component as the input source.
This function doesn’t work if the CR-505DAB is already 
on.

 

■

 

When you press the play button on a component connected 
via 

, the CR-505DAB automatically selects that compo-

nent as the input source.

 

■

 

When you set the CR-505DAB to Standby, all components 
connected via 

 also enter Standby.

 

■

 

Other components can be controlled with the supplied 
remote controller (see “Remote Controller” on page 10).

 

■

 

An MD recorder or cassette tape deck connected via 

, 

and set to record pause, will start recording automatically 
when CD playback is started on the CR-505DAB.

 

■

 

The CR-505DAB’s timers can be used to automatically start 
playback or recording on a cassette tape deck or MD 
recorder connected via 

 (see “Timers” on page 32).

 

■

 

When you set the CR-505DAB’s sleep timer, the sleep tim-
ers on component connected via 

 are also set, so all 

components switch off after the specified period.

To use 

, you need to connect the CR-505DAB’s 

 

connector to an 

 connector on the other component by 

using an 

 cable. An 

 cable is supplied with each 

-

compatible Onkyo cassette tape deck and MD recorder.

 

• Use only 

 cables for 

 connections.

 

 

 

• If a component has two 

 connectors, you can connect 

either one to the CR-505DAB. The other connector is for 
connecting additional 

-compatible components.

• Connect the CR-505DAB’s 

 connector only to Onkyo 

components. Connecting to other manufacturer’s compo-
nents may cause them to malfunction.

• Some Onkyo 

-compatible components may not sup-

port the special functions described above.