D-Link DNR-326 User Manual

Section 3 - Configuration

Event Setup

Step 1: Select an event below.

• Connection Lost: If the connection between the camera and the

DNR-326 is lost, this event will be triggered.

• Motion from Camera: If motion is detected by this camera, this event will

be triggered.

• Input: Any external input can be used to trigger this event.

• Hard Disk Space Full: When the Overwrite function is not enabled, the

NVR will stop recording when the HDD is full.

Step 2: Click Add to select an action for the event:

• Output: When an event occurs, a signal will be sent to other connected

devices.

• Email: When an event occurs, an e-mail notification will be sent to the

specified e-mail address.

• CMS: When an event occurs, a signal will be sent to CMS.

• Push Notification: When an event occurs, an instant message will be sent

to the registered mobile clients. Mobile users can view recorded video of

the event through their mobile clients.

• E-map Popup: When an event occurs, an E-map will pop up with an event

indicator to show the location of the event.

Step 3: Click the action you want to use, and then click Configure to modify

the details of that action if necessary.

Step 4: Repeat steps 2 and 3 to add more actions, or click the Save button to

save your changes.