D-Link DNR-326 User Manual

58

D-Link DNR-326 User Manual

Section 3 - Configuration

Detect all movements in the defined area.

1.   Define a detection zone by clicking and dragging to draw an area on the 

image. You may define more than one zone by repeating this step.

2.   Modify the sensitivity setting by adjusting the slider control. Moving the 

slider toward the right will increase the sensitivity level, which means a 

relatively small movement will trigger the alarm.

3.   Set the interval. Moving the slider toward the right will increase the time 

interval so that the alarm will only be triggered when the movement lasts 

for a longer period of time.

4.   Select the Stop when found option. If unchecked, the search tool will list 

all the events it found, instead of stopping at the moment the event was 

found.

5.   Click Search.

The alarm will trigger when any additional object appears in the defined 

area on the screen.

1. Define the detection zone by clicking and dragging to draw an area on the 

image.

2. Modify the sensitivity setting.

Smart Search allows users to search for specific unusual events based on certain criteria.

There are 5 types of unusual events: General Motion, Foreign Object, Missing Object, Lose Focus, and Camera Occlusion. 

Users can refresh the Date Time Search Dialog Window or go to the previous or next recording date by pressing the upper 

left corner buttons. After opening the recorded video, click the Search Mode button to obtain the Intelligent Search Tool 

panel and select the type of event in the Alarm Event Type pulldown menu you would like to search for.