Speco Technologies HT-7246iHR User Manual

21

22

5) WHITE BALANCE

①

Press the SET button to display the SETUP menu and move the 

arrow  indicator to ‘WHITE BALANCE’ using the UP or DOWN button.
②

Set ‘WHITE BAL.’ to the desired mode using LEFT or RIGHT button.

●

Proper White Balance may not be obtained under the following

conditions.  In these cases select the AWC mode.

-When the scene contains mostly a high color temperature object, such 
as a blue sky or sunset.
-When the scene is dim.
-If your camera faces a fluorescent lamp directly or is installed in an 
area with constantly changing illumination.

▶

ATW (Auto Tracking White Balance)

: When color temperature is 2400~12000K, select this mode.

(ex. A fluorescent lamp, outdoor).  This is the best setting for most conditions

▶

AWC (Auto White Balance Control)

: The white balance is automatically adjusted for a specific environment. 

In order to obtain the best result, press the set button while the camera 

focuses on white paper. If the environment including the light source is 
changed, you have to adjust the white balance again.

▶

MANUAL : To fine adjust, select the Manual mode. You can increase 

or decrease the red  or blue factor while monitoring the difference on 
the  screen. Set to ‘MANUAL’ mode and press the SET button. Increase 
or decrease the value for RED(R-Gain) and BLUE(B-Gain), watching
the color  of the picture, and press the SET button when you obtain the 
best color.