EverFocus EZ600/B Leaflet

Page of 2
EZ600/W
EZ600/B
HIGH PERFORMANCE
BULLET CAMERA
OPERATION MANUAL
Before attempting to connect or operate, please read and 
follow these instructions.
CAUTIONS
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European 
countries with separate collection systems)
This marking shown on the product or its literature, indicate that 
it should not be disposed with other household wastes at the end 
of its working life. To prevent possible harm to the environment or 
human health from uncontrolled waste disposal, please separate 
this from other types of wastes and recycle it responsibly to promote 
the sustainable reuse of material resources.
This product should not be mixed with other commercial wastes 
purchased this product, or their local government office, for details 
of where and how they can take item for environmentally safe 
recycling.
Business users should contact their supplier and check the terms 
and conditions of the purchase contract.
Household users should contact either the retailer where they for 
disposal.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 
NOT REMOVE COVER(OR BACK). SERVICING MUST 
BE DONE BY QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence 
of uninsulated "dangerous voltage" within the product's 
enclosure that may be of sufficient mangnitude to constitute 
a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of 
important operating and maintenance(servicing) instruction in 
the literature accompanying the appliance.
FEATURES
• 1/3" Sony Super-HAD CCD
   
Minimum illumination 0.00002 Lux
    ( F1.2, 30 IRE, Sense-up X256, AGC high ) S/N Ratio 50dB
• High Resolution 600TV Lines
This camera displays a high resolution of 600 TV Lines using 
sophisticated full digital image processing, 10 bit A/D serial signal 
processing and special algorithm technologies.
• 3D DNR (3D Digital Noise Reduction)
The DNR technology greatly reduces noise thus delivering a crisp 
and clear image.
This camera’s DNR function utilizes an adaptive 3D Filter to reduce 
noise caused by movement and the evironment.
• DAY&NIGHT
The Day & Night operation feature an ‘auto’ mode which switches 
between color and B&W modes automatically based on the level 
of illumination in the scene. The COLOR mode operates during 
bright conditions to provide optimum colors while the B&W Mode 
operates during dark conditions to enhance the definition of the 
image. Or, the camera may be set to return a color image at all 
light levels.
• Privacy Mask Function
The Privacy masking feature allows for the ‘blanking’ of specific 
areas in a scene where viewing or recording is prohibited or not 
desired.
• OSD (On Screen Display)
This camera is easily configured with its OSD (On Screen Display), 
menu. The menu can be displayed in multiple languages.
MOUNTING POSITION
DIMENSIONS
Unit: mm(inch)
CAUTIONS
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions;
1. This device may not cause harmful interference.
2. This device must accept any interference received,  including 
    interference that may cause undesired operation.
Do not make any changes to the houseing or internal parts. This could void 
the FCC certification and may void the warranty.
Caution -
 CAUTION 
1. IF DC power is used regulated DC12V 500mA power supply is 
recommended for use with this camera for the best picture and the most 
stable operation. 
An unregulated power supply may cause damage to the camera.
If an unregulated power supply is used, product warranty may be void.
2. It is recommended that the camera is used with a monitor that has 
a CCTV quality 75Ω video impedance level. If your monitor or other 
equipment is switched to high impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal 
components. Refer servicing to the manufacturer
4. Never face the camera towards the sun or any bright or reflective light, 
which may cause smear on the picture and possible damage to the CCD.
5. Do not remove the serial number sticker.
This equipment has been tested and found to comply with the limits for a 
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in which case the user 
will be required to correct the interference at his own expense.”  
Note -
This is a class A product. In a domestic environment this product may cause 
radio interference in which case the user may be required to take adequate 
measures.
WARNING -
COMPONENTS
Bullet
Camera
Mounting 
Bracket
Mounting
Screw 3ea
Power
Pigtail Cable
Operation 
Manual
Ф
60(
Ф
2.36)
41.5(1.63)
36 (1.41)
3-Ф
4.5(0.11-Ф0.18)
CONNECTION
When you install the camera, please seal the ends of 
cables to protect the camera coneections from humidity 
problems.
DC12V/AC24V
(RED)
BNC FEMALE
VIDEO IN
DC12V POWER SUPPLY /
AC24V POWER SUPPLY
TV MONITOR
OR DVR
1/4"-20 UNC
Depth 4.5(0.18)
 Joystick for OSD 
133(5.23)
Ф
36(Ф1.41)
124(4.88)
51.2(2.02)
Ф
29(Ф1.14)
33.5(1.32)
Focus Ring
(NEARFAR)
Zoom Ring
(WideTele)
360˚
90˚
360˚
Camera with sunshield
Camera body only
Mount
Mounting base pattern