Faber M1400 User Manual
92 • Technical Specifications
Genie Monochrome Series-GigE Vision Camera
External Outputs
• Programmable output mode such as strobe, event notification, etc. (see
"
).
OUT+
OUT-
Genie
side
side
User
side
Hirose-12
Connector
pins
NEC PS2805-1
OUT
680
75
The opto-coupler is typically a NEC PS2805-1 with the following characteristics.
Output Electrical Parameter Description
Value
Maximum voltage difference
13 V
Maximum current through opto-coupler
12mA
Minimum output pulse width
100 us
Maximum switch closure transition time
12 µs
Maximum switch open transition time
40 µs
RJ45 LAN Ethernet Connector Details
The RJ45 LAN connector has two LEDs for network status conditions.
The LED color codes are as follows.
Network Connection
Network Activity
Green
100Mbps
Off
no network activity
Orange
1000Mbps
Yellow
typically blinking – active
Network Connection
Network Activity
The Genie LAN connector is a standard Ethernet socket. Use CAT5e or CAT6 certified Ethernet cables. CAT5e
cable is rated for 100 MHz spectral bandwidth but CAT6 cable is rated for a 200 MHz spectral bandwidth with less
signal attenuation, therefore strongly recommended for long connection lengths.
cable is rated for 100 MHz spectral bandwidth but CAT6 cable is rated for a 200 MHz spectral bandwidth with less
signal attenuation, therefore strongly recommended for long connection lengths.
The interconnection Ethernet cable can be either Straight Through or Crossover cable type. The Gigabit Ethernet
standard for devices defines that they will auto-negotiate send and receive channels, eliminating the need for users
to use a specific Ethernet cable type.
standard for devices defines that they will auto-negotiate send and receive channels, eliminating the need for users
to use a specific Ethernet cable type.