First Alert K5309-5V2 User Manual
– 7 –
6\VWHP2YHUYLHZ
&RQWLQXHG
Phone Access
• If included, a Phone Module permits you to access the system via a touch-tone
phone, either on-premises or by calling-in when away.
• You can receive synthesized voice messages over the telephone regarding the
status of the security system.
• You can arm and disarm the system and perform most function commands
remotely via the telephone, with voice confirmation provided after each command.
• Refer to the Phone Access User's Guide supplied with the Phone Module for
information regarding the use of this feature.
Paging Feature
• If programmed, the system can automatically send certain system condition
messages to up to four (FA168CPS) or two (FA148CP) pagers.
• The system can also automatically alert a pager if the system has not been
disarmed by a certain time (e.g., can let you know a child has not arrived home).
• You can also manually send a message to designated pagers.
8VLQJWKH9RLFH0HVVDJH&HQWHULI9RLFH.H\SDGLVLQVWDOOHG
The Voice Keypads feature a voice message center
that lets you record and playback one message.
• The message can be up to 2.5-minutes long
• The message remains in the keypad’s memory
that lets you record and playback one message.
• The message can be up to 2.5-minutes long
• The message remains in the keypad’s memory
until a new message is recorded.
• The volume control of the message is adjustable.
• Refer to the procedures below when using the
• Refer to the procedures below when using the
Message Center functions.
FA560VKP-004-V0
VOLUME
KEY
KEY
VOICE
KEY
FUNCTION
KEY
KEY
STATUS
KEY
DOWN
VOLUME
VOLUME
PLAY KEY
AND
UP VOLUME
AND
UP VOLUME
RECORD
KEY
MICROPHONE
A
B
C
D
6
4
7
BYPASS
9
CHIME
#
3
STAY
5
TEST
8
CODE
0
2
AWAY
1
OFF
MAX
READY
INSTANT
*
RECORD
STATUS
ARMED
MESSAGE
READY
PLAY
VOLUME
VOICE
FUNCTION
FA560
LCD
DISPLAY
DISPLAY
FUNCTION
KEYS
LEDS
SPEAKER
Message Center Functions
To…
Press these keys…
Notes…
record a
message
message
[#] FUNCTION + [0] VOICE + [1] RECORD
The red MESSAGE LED lights.
Message remains in memory
until a new message is recorded.
Message remains in memory
until a new message is recorded.
end
recording
recording
[1] RECORD
The red MESSAGE LED flashes,
indicating message waiting.
indicating message waiting.
play a
message
message
[#] FUNCTION + [0] VOICE + [3] PLAY
The recorded message plays and
the red MESSAGE LED turns off.
the red MESSAGE LED turns off.
adjust the
volume
volume
[#] FUNCTION + [0] VOICE + [2] VOLUME keys,
then press volume key [3]
then press volume key [3]
↑ (up) or [6] ↓ (down)
Adjusting message volume also
adjusts status volume. Volume
cannot be adjusted while playing.
adjusts status volume. Volume
cannot be adjusted while playing.