Faber M1600 User Manual

8  •  Genie Monochrome Series Overview 

Specifications for each available sensor are listed after the general Genie camera specifications.  
 
 

Synchronization Modes 

Free running and Triggered 
Synchronous and Reset mode 
Software trigger (through Ethernet) 

Exposure Modes 

Programmable (1µs granularity) 
Pulse controlled 

Trigger Input 

Opto-isolated, 2V to 12V typical, 2mA min.  
Debounce range from 1 µs up to 255 µs 

Strobe Output  
 

Output opto-isolated: Aligned to the start of exposure with a 
programmable delay, duration and polarity  

LUT 

8-bit / 10-bit 

Flip 

Real-time horizontal flip 

Binning 

Horizontal (2 pixel) and Vertical (2 line)  

Timestamp 

1µs internal timer to timestamp images and events 

Test image 

Internal pattern generator 

User settings 

Select factory default or one user camera configuration 

Back Focal Distance—C mount 

17.52 mm 

Camera Size 

29(H) x 44(W) x 67(L) in mm, ( see Mechanical Specifications ) 

Mass 

< 125g (no lens) 

Power connector 

12 pin male Hirose 

Ethernet connector 

RJ45 

Input Voltage  

+11 to +13 Volts DC,  ( over voltage–reverse voltage protected ) 

Power Dissipation 

< 4W 

Operating Temperature 

0 to 45°C 

Output Data Configuration 

Gigabit Ethernet (IEEE 802.3) 

Data and Control 

GigE Vision compliant at 1000 or 100 Mbps