Faber M1600 User Manual

Installing the Genie Camera  •  29 

When the Genie camera is directly connected to a Gigabit network adapter on a host computer or via a network 
switch, testing the installation with CamExpert is a straightforward procedure.  
•  Start Sapera CamExpert by double clicking the desktop icon created during the Genie software installation.  
•  CamExpert will search for installed Sapera devices. In the Device list area on the left side, the connected Genie 

camera is shown or will be listed in a few seconds after CamExpert completes the automatic device search 
(device discovery).  

•  Select the Genie camera device by clicking on the camera user-defined name. By default the Genie camera is 

identified by its serial number. The LED of the Genie will turn green, indicating the CamExpert application is 
now connected. 

•  Click on the Grab button for live acquisition (the Genie default is Free Running mode). Focus and adjust the 

lens iris. See 

" on page 31

 for information on CamExpert parameters with the Genie 

camera.  

•  The following figure shows CamExpert with the Genie generating a diagonal test pattern.