Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. SNC-M3
  5. User Manual

Sony SNC-M3 User Manual

Download
Page of 8
Set up the Camera
5
 
7
Enter or select the name of the folder 
in which to install the program, then 
click “Next.”
The default setting is “IP Setup Program.”
The program is installed. After the installation, 
“Setup Complete” dialog is displayed.
8
Click “Finish.”
The IP Setup Program installation is completed.
6
Set up the Camera
To connect the camera to a network, you need to assign a 
new IP address to the camera. This section explains how 
to assign an IP address to the camera using the installed 
IP Setup Program and how to configure other network 
settings.
1
Start the IP Setup Program.
Select “Program” from the “Start” menu of 
Windows, then select “IP Setup Program.”
The IP Setup Program runs and displays all the 
cameras connected to the network in the camera 
list.
2
Click on the camera in which you want 
to assign an IP address.
When multiple cameras are connected to the 
same network, check the model name and serial 
number on the rear of the camera.
The network settings for the selected camera are 
displayed.
3
Click on “Obtain an IP address 
automatically.”
By selecting “Obtain an IP address automatically,” 
the IP address is automatically assigned by the 
DHCP server. The “Subnet mask” and “Default 
gateway” are also assigned.
Notes
• For viewing the camera image via Internet, the global IP 
address provided by ISP is required.
• This section explains the usual settings using “Obtain an IP 
address automatically” or “Use the following IP address,” 
“Obtain DNS server address automatically” and “HTTP port 
No. 80.” If you need other settings, refer to the User’s Guide 
stored in the supplied CD-ROM.
1
Enter the 
folder name.
2
Click.
Click.
Click on the camera to assign an IP address.
IP address is displayed.
Select this.
Default gateway 
is displayed.
Subnet mask is 
displayed.