Sony SNC-VL10N User Manual

Setting the Security — Security Setting Page

19

When you click Security in the menu section, the 
Security Setting page appears.
Use this page to limit the computers that can access the 
camera or encrypt the monitor image.

Limits access to the camera by the IP address and 
subnet.

Select Enable when you want to limit the access to the 
camera, or Disable when you do not want to limit the 
access.
To set a limit, use the following items.

Select the basic policy of the limit from Allow and 
Deny.
If you select Allow, you will basically allow access to 
the camera, and only deny access to the camera from the 
computers having the IP addresses specified on IP/
Subnet Client Address 0 to 9 below.  If you select 
Deny, you will basically deny access to the camera, and 
allow access to the camera from the computers having 
the IP addressed specified below only.

Type the IP addresses and subnet addresses you want to 
allow or deny access to the camera.  You can specify up 
to 9 IP addresses and subnet addresses.  For a subnet 
address, type 0 to 31.
To temporarily cancel the Default Policy for an IP 
address/subnet, select Allow or Deny from the drop-
down list on the right.

Limits the display of the monitor image by the image 
encryption.

Select Enable when you want to encrypt the image, or 
Disable when you do not want to perform the 
encryption.

Type a PIN (Personal Identification Number) to allow 
displaying the monitor image of up to 11 characters.
When Image Encryption Mode is set to Enable, a 
dialog to request the input of the PIN number appears 
when a user logs in the camera, returns to the viewer 
page from the FAQ or Version page or enters the Camera 
Setting page. The user can view the monitor image by 
typing the PIN number specified here.