Sony SNC-VL10N User Manual

Configuring the Serial Port — Serial Setting Page / Configuring the Sensor I/O Port — Sensor I/O Setting Page

25

When you click Serial in the menu section, the Serial 
Setting page appears.
Use this page to configure the RS485/232C serial port 
on the rear panel of the camera.

Select the protocol for the serial port from the drop-
down list.  The selected protocol is automatically 
displayed in Port Device Name.

Select this option when using RS-232C protocol.

Select this option when using RS-485 protocol.

Displays the setting of Serial Port Selection.

Select from the drop-down list, On to enable the RS485/
232C port, or Off to disable it.

When you click Sensor I/O in the menu section, the 
Sensor I/O Setting page appears.
Use this page to configure the Sensor I/O port on the rear 
panel of the camera.

Set up the activity detection that detects movement in 
the image shot by the camera.

Select Enable if you want to output an alarm when 
movement is detected, or Disable if you do not want to 
output an alarm.

Using the boxes below, you can set up to 6 schedules on 
which the activity detection works.
Select Enable to enable all the schedules whose check 
boxes you have selected, or Disable to disable them.

For each schedule, type the time in hours and minutes 
when the activity detection starts and ends, and select 
the check box(es) of the working days of the week.
To enable each schedule you have set, select the check 
box on the left of Scheduling.  You can select multiple 
schedules.

A schedule across days (ex. 22:00 - 2:00) cannot be set.