Sony SNC-DH210T User Manual

Pre

par

at

ion

Assigning the IP Address to the Camera

7

The factory setting of the camera network is DHCP 
mode.

Select a camera you want to assign an IP address 
from the list and click Network.
The account settings screen is displayed.

Register the name and password of the 
administrator and click OK.
The factory settings for both items are “admin”.
The Network Setting screen is displayed.

Set the IP address.

To obtain the IP address automatically from a 
DHCP server:
Select Obtain an IP address automatically.
The IP address, Subnet mask and Default gateway 
are assigned automatically.

When you select Obtain an IP address 
automatically, make sure that the DHCP server is 
operating on the network.

To specify the IP address manually:
Select Use the following IP address, and type the 
IP address, Subnet mask and Default gateway in the 
relevant boxes.

Set the DNS server address.

To obtain the DNS server addresses 
automatically:
Select Obtain DNS server address automatically.

To specify the DNS server addresses manually:
Select Use the following DNS server address, and 
type the Primary DNS server address and 
Secondary DNS server address in the relevant 
boxes.

Set the HTTP port No.
Normally, select 80 for the HTTP port No. To use 
another port number, type a port number between 
1024 and 65535 in the text box.

When using a port number other than 80, check 
with the network administrator first.

Confirm that all items are correctly set, then click 
OK.
If “Setting OK” is displayed, the IP address is 
correctly assigned.

When setting is finished, to access the camera 
directly, double-click the camera name in the list.