Sony 3-869-888-16 (1) User Manual

Page of 186
28
Chapter 2  Initial Configuring the System
Note
When using the NSR-100/50, connect the following devices to each of the 
LAN ports.
LAN 1: Network cameras
LAN 2: Remote clients
LAN 3: External storage devices (This may not be supported depending on 
the software version. For details, consult your dealer.)
10
To configure general settings, click [General Setting] and then [Select]. 
The [General Network Setting] screen appears.
11
Configure each item below, and then click [Accept]. 
Primary DNS
Enter the IP address for the primary DNS (Domain Name Server). Skip this 
entry if a primary DNS is not available or not required.
Secondary DNS
Enter the IP address of the secondary DNS. Skip this entry if a secondary 
DNS is not available or not required. 
Default Gateway
Enter the IP address of the default gateway. Skip this entry when only a 
local network is used or when connections to other networks are not 
required. 
Hosts Setting
If a host name needs to be registered in the hosts file, enter the IP address 
and corresponding host name, and then click [Add] to add it to the list. 
12
To configure each LAN port, click [Network Device] and then [Select]. 
Configure the “Network Device” settings for each of the LAN ports. 
The [Network Device] screen appears.