Sony SIR-4160 User Manual

COLOR CCD CAMERA

User Guide

COLOR CCD CAMERA

User Guide

MAIN SETUP

 

1.LENS 

DC 

 

2.EXPOSURE  

 

3.WHITE BAL 

ATW

• If color rolling occurs when using a DC lens, set Shutter to Fixed (---).

Notes

1.  When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function 

Setup Switch.

2. Select a desired mode using the Function Setup switch.

• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.

Notes

 AGC(AUTO GAIN CONTROL) :  The higher the gain level, the brighter the screen - but 

the higher the noise.

    - OFF   : Deactivates the AGC function.
    - LOW  : Allows automatic gain control from 5.3dB to 32dB.
    - HIGH  : Allows automatic gain control from 5.3dB to 37dB.

 SENS-UP :  When it is night or dark, the camera automatically detects the light level 

and maintains a clear picture if this mode is activated.

    - OFF  : Deactivates the SENS-UP function.
    - AUTO : Activates the SENS-UP function.

 RETURN :  Select this to save the changes in the EXPOSURE menu and return to the 

SETUP menu.

   SHUTTER : You can select either auto or manual shutter.

 

- ---  

:  Shutter speed is fixed at 1/60sec(1/50sec)

 

- ESC  

:  Select this to control the shutter speed automatically. If ESC is selected, the 

shutter speed is automatically controlled depending on the ambient 
illumination of the subject.

 

- MANUAL :  You can control shutter speed manually.  

(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)

 

- A.FLK   :  Select this when you see picture flicker, this can happen when the frequency 

of the local lighting clashes with the camera.   

EXPOSURE SETUP

 

1.BRIGHTNESS 

25

 

2.SHUTTER 

---

 

3.AGC 

HIGH 

 

4.SENS-UP 

 OFF 

 

5.RETURN

 

Use the White Balance function to adjust the screen color.
1.  When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function 

Setup switch so that the arrow indicates ‘White Bal’.

2. Select a desired mode using the Function Setup switch.

• If you press the Function Setup switch to ‘AUTO’ mode, you can adjust brightness by increasing or

decreasing the shutter speed. (x2 ~ x512)

• Note that the higher the zoom level, the brighter the screen, but the more likely there will be a

ghosting effect.

• It is normal for Noise, Spots and Whitish symptoms to appear in SENS-UP mode when the

D-ZOOM level is increased.

Notes

  -  FOCUS ADJ :  To adjust the DC lens focus correctly, you must activate the Focus Settings 

mode under each lens menu. Activate the Focus Settings mode, adjust 
the lens focus, and then deactivate the settings mode. 

MAIN SETUP

 

1.LENS 

DC 

 

2.EXPOSURE  

 

3.WHITE BAL 

ATW 

 

4.SSDR 

OFF