Sony SIR-4160 User Manual

COLOR CCD CAMERA

User Guide

COLOR CCD CAMERA

User Guide

 FRONT DOOR

• When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen

even if you enter one.

• Only English is available in this mode.
• If you move the cursor to CLR and press the Function Setup switch, all the letters

are deleted. To edit a letter, change the cursor to the bottom left arrow and press
the Function Setup switch. Move the cursor over the letter to be edited, move the
cursor to the letter to be inserted and then press the Function Setup switch.

Notes

 SYNC :  In areas where the supply is at 60Hz(NTSC), 

50Hz(PAL), you can synchronize the output phase 
of multiple cameras using the power 
synchronization function (Line-Lock) without using 
a synchronization signal generator.

  - INT : Internal Synchronization Type    
  - L/L : Power Synchronization Type, Line-lock    
  • Press the Function Setup switch.
  •  You can select a desired phase from 0 to 359 when select 'phase'.

• When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L

type synchronization.

• When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.

Notes

 MOTION DET :  

   This product has a feature that allows you to observe 

movement of objects in 8 different areas on the screen, 
and the words 'MOTION DETECTED' appear on the screen 
when movement is detected. 
Activity can be monitor more efficiently.

    1)    When the SPECIAL menu screen is displayed, press the 

Function Setup switch so that the arrow indicates‘MOTION DET’.

  2)   Set up the mode using the Function Setup switch.
 

- SENSITIVITY :  You can select up to 8 MD areas. When SENSITIVITY number is high, motion 

detection sensitivity is increased to recognize even small movement.

 

- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.

 

- SEL POS : Determines which of the 4 vertices of each MD area is to be used.

 

- XPOS : Determines the coordinate of the horizontal axis for SEL POS.

 

- YPOS : Determines the coordinate of the vertical axis for SEL POS.

 

- FILL→SET :  Fills in a selected MD area. The color of the area can be selected from 

brown, orange, blue, cyan, green, yellow, magenta and red.

 

- RETURN :  Select this to save the MOTION DET menu settings and return to the SPECIAL menu.

  3) 

Press the Function Setup switch.

  4)   Use the Function Setup switch to move to 

a desired letter and select the letter by 
pressing  the  Function  Setup  switch. 
Repeat this to enter multiple letters. You 
can enter up to 15 letters.

 

5)   Enter a title, move the cursor to ‘POS’ and 

press the Function Setup switch. The 
entered title appears on the screen. Select 
the position to display the title on the 
screen by using the Function Setup switch 
and press the Function Setup switch. 
When the position is determined, select 
‘END’ and press the Function Setup switch 
to return to the SPECIAL menu.

  CAM TITLE : If you enter a title, the title will appear on the monitor.

   1)  If the SPECIAL menu screen is displayed, use the Function Setup switch so that the 

arrow indicates ‘CAM TITLE’.

  2) Set it to ‘ON’ by using the Function Setup switch. 

 

  CAMERA TITLE SETUP

A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 0 1 2 3 4 5 6 7 8 9

← → C L R   P O S   E N D