Sony SIR-4160 User Manual

COLOR CCD CAMERA

User Guide

COLOR CCD CAMERA

User Guide

• When you adjust to the ZOOM & FOCUS of the lens, Please remove the front cover

from the camera, by turning the cover counterclockwise.

• To adjust the zoom & focus loosen the individual levers before tightening them

again.

• To ensure the weatherproof integrity is maintained, ensure the front cover is

tightened correctly.

Notes

1. Remove the sunshield from the camera.
2. Remove the front cover from the camera by turning it counterclockwise.
3. Unlock the Zoom or Focus lever before adjusting the lens.
4.   Adjust the zoom & focus by moving the lever counterclockwise for (NEAR & TELE) 

and clockwise for (WIDE & FAR) position.

5.   After adjustment, tighten the zoom or focus levers, taking care not to adjust the 

zoom/focus position.

6. Please, close and tighten the front cover.
7. Replace the sunshield.

• If the front cover is cross threaded or not correctly tightened the camera housing

will not be weatherproof.

• When you combine the front cover, combine the triangle of front cover and triangle

of main body confront each other.

Notes

Front cover

Focus lever

ZOOM lever

❽

  Power input terminal : Connect the power as specified for each model here.

9

 Video output terminal :  Video signals are output through this port. Connect 

this port to the Video IN port of a monitor.

❿

  RS-485 control terminal : 

You can control SETUP MENU through this port by using external controllers like a 

Remote controller that RS-485 Communication is supported. For details, see page 14. 

➑

9

❿