Sharp AR-NB2 A User Manual

Symbol Set

Select one of 35 sets.

This specifies which country's characters (PCL symbol set) are assigned to 
certain of the symbols in the character code list. The factory default setting is 
[PC-8]. 

Font

Select one internal or 
one external font.

This specifies which PCL font to use for printing. One font can be specified from 
among the internal fonts and extended fonts (when the barcode font kit or the 
Flash ROM kit is installed). The factory default setting is [0: Courier].

Line Feed Code

CR=CR; LF=LF; 
FF=FF,
CR=CR+LF; LF=LF; 
FF=FF,
CR=CR; LF=CR+LF; 
FF=CR+FF,
CR=CR+LF; LF=CR+LF; 
FF=CR+FF

This specifies the line break code by means of a combination of the "CR" 
(return) code, "LF" (line break) code, and "FF" (page break) code. The factory 
default setting is printing based on the transmitted code. The setting can be 
changed by selecting one of four combinations.

Wide A4

Enable, Disable

This setting can be enabled to print 80 lines on A4 size paper with each line 
10CPI font (English characters). When the setting is disabled (a checkmark 
does not appear), each line is 78 characters long.