JAI CV-M30 User Manual

 

 

 

Fig. 1. Locations 

                                               
 

1. 

1/2” interline-transfer type CCD sensor  

2.

 

Lens mount for C-mount lenses. *1) 

3. 

BNC connector for video output   

4.   Switch block SW1 for shutter speed and function mode setting 
5. 

6-Pin connector for Input/output of control signals 

6. 

12-Pin connector for 12V DC power and external sync signals 

7. 

Gain potentiometer for manual gain adjustment 

8. 

Screw holes for Tripod mount plate. (Screws 3.0 x 5mm) 

9. 

Tripod mount plate to place the camera on a tripod 

 

Note *1):  

Rear protrusion on the C-mount lens must be less than 10mm (0.4 inches approx.). 

 

When IR-cut filter is used, it must be less than 7.0 mm (0.28 inches approx.). 

 

 

 

The IR-cut filter is placed in the C-mount thread. 

 

 

The C-mount IR-cut filter must be ordered separately.

 

- 3 -