JAI TS-1327EN User Manual

 

 

 
 

 

 

The material contained in this manual consists of information that is proprietary to JAI Inc., and 
may only be used by the purchasers of the product. JAI Inc. makes no warranty for the use of its 

product and assumes no responsibility for any errors which may appear or for damages resulting 
from the use of the information contained herein. JAI Inc. reserves the right to make changes 

without notice. 

Microsoft, Windows XP, Windows 2000, Windows 98, Windows NT, and Windows Explorer are either 

registered trademarks or trademarks of Microsoft Corporation in the United States and/or other 
countries. 

Each JAI product is warranted to be free from defects in material and workmanship under normal 
intended use and service if installed in accordance with this manual. The warranty period is 2-years 

and begins on the date of shipment from JAI stock. 

This warranty shall not apply to repairs or replacements necessitated by any cause beyond the 

control of JAI, including but not limited to, 1) improper installation, 2) acts of nature, 3) accidents, 
4) misuse, 5) lack of proper maintenance, 6) unauthorized repairs or modifications. 

Be advised, that you need to obtain an RMA number from JAI before returning units for warranty 
repair. 

CE Compliance 

The TS-2030EN, TS-1327EN and TS-9720EN series of cameras have been certified to conform to the 

requirements of Council Directive 89/336/EC for electromagnetic compatibility and to comply with 
the following European Standards: 

Emissions: EN 55022A: 1998 + A1: 2000 + A2: 2003 

Immunity: EN55024: 1998 + A1: 2001 + A2: 2003 

All JAI products bearing the CE mark have been declared to be in conformance with the applicable 

EEC Council Directives. However, certain factory-installed options or customer-requested 
modifications may compromise electromagnetic compatibility and affect CE compliance. Please 

note that the use of interconnect cables that are not properly grounded and shielded may affect CE 
compliance. 

Contact JAI Applications Engineering Department for further information regarding CE compliance. 

FCC 

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference when the equipment is operated in a commercial environment. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area may cause harmful interference, in which case the 

user will be required to correct the interference at his own expense.