JAI TS-1327EN User Manual
Installing the Vehicle Imaging Subsystem
23
VIS-CAM System
3.3 Installing the J-Panel
The J-panel layout is shown in Appendix A, See “Connection requirements.” on page 43. This
Appendix has a detailed description of the J-Panel function and connectors.
3.3.1 X1 and X2 VIS CAM 300/400
The VIS CAM connections to the J-Panel are shown in Table 3 and Figure 20
Table 3
VIS CAM connections to the J-Panel.
X1, X2 Pin #
Wire Color
Signal
Remarks
1
White/orange in Cat5e/6 cable
Ethernet A+
2
Orange in Cat5e/6 cable
Ethernet A-
3
White/green in Cat5e/6 cable
Ethernet B+
4
Green in Cat5e/6 cable
Ethernet B-
5
White/blue in Cat5e/6 cable
Ethernet C+
not used with VIS CAM
6
Blue in Cat5e/6 cable
Ethernet C-
not used with VIS CAM
7
White/brown in Cat5e/6 cable
Ethernet D+
not used with VIS CAM
8
Brown in Cat5e/6 cable
Ethernet D-
not used with VIS CAM
9
Black wire in Red/Black pair
Gnd
10
Red wire in Red/Black pair
+24V dc
11
White wire in Brown/White pair
Vinit+
Trigger signal
12
Brown wire in Brown/White pair
Vinit-
Trigger signal
13
White wire in Red/White pair
RS485D+
Lane Controller
14
Red wire in Red/White pair
RS485D-
Lane Controller
15
White wire in Orange/White pair
RS485D+
Lane Controller
16
Orange wire in Orange/White pair
RS485D-
Lane Controller