Swann SWPRO752CAM User Manual

Introduction

Congratulations on your purchase of this Swann PTZ Camera! 
This installation and setup guide will walk you through the basics of connecting the 
PTZ camera to your DVR, and walk you through the settings on the DVR you’ll need 
to use to control the camera.

Be aware that 

The included stand-alone RS485 controller will operate the basic features of the 
camera, and access the on-screen display (OSD). You won’t be able to program the 
camera properly or integrate it’s functions with your system unless your DVR is 
configured to do so.

This Swann PTZ camera is compatible with most current Swann DVRs. We can 
confirm that it will work with the following DVR models:

This is not an exhaustive list - since the time of publication we may have released 
newer DVRs with which this camera is compatible. Check your DVR documentation 
to learn more. Any Swann DVR with an RS485 port should be compatible with this 
camera.

IMPORTANT: If mounting the camera outside, be sure to properly seal all joints in 

the mounting arm/bracket using a silicon sealant. If this is not fully sealed, water 

can enter the dome causing malfunction or failure.

PRO-752 Camera

RS485 Controller

Camera Cable

Extension Cable

Screws and Mounting Hardware

Power Supply (not pictured)

Power Splitter (not pictured)