Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Managing displays 

111

Displaying ICLID Information 

Be sure Analog Trunk Incoming Call ID field is set to 

on the System-Parameters 

Customer-Options screen. 

Refer to the DEFINITY ECS System Description for information on the required 
circuit pack.

Let’s set up the analog diod trunk group 1 to receive calling party information and 
display the calling party number on the phone of the person called.

1. Type 

.

The 

Trunk Group

 screen for trunk group 1 appears. The Group Type field is 

already set to diod.

2. Press 

NEXT PAGE

 to display the Trunk Features page.

3. Type 

 in the Receive Analog Incoming Call ID field.

4. Press 

NEXT PAGE

 to display the Administrable Timers section.

5. Type

 in the Incoming Seizure (msec) field.

6. Press 

ENTER

 to save your changes.

change trunk-group 1

Page 2 of x

                                 TRUNK GROUP
TRUNK FEATURES

ACA Assignment? n 

Measured: none

Maintenance Tests? y

Data Restriction? n

Suppress # Outpulsing? n

Receive Analog Incoming Call ID: Bellcore

Incoming Tone (DTMF) ANI: no

change trunk-group 1

Page 3 of x

                                 TRUNK GROUP
ADMINISTRABLE TIMERS       
   Incoming Disconnect(msec): 500

  Incoming Dial Guard(msec): 70

      

 Incoming Seizure(msec): 120

          Flash Length(msec): 540

Incoming Incomplete Dial Alarm (sec): 255

END TO END SIGNALING

Tone (msec): 350

Pause (msec): 150