Lucent Technologies 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Enhancing system security
322
Using access security gateway
11
2. On the Access Security Gateway Login Administration page (page 2), set
the Blocked field to
y
.
Setting the Blocked field to
y
does not remove the login from the system,
but temporarily disables the login.
3. Press
ENTER
to save your changes.
NOTE:
A superuser can disable and restart access for another superuser.
Restarting Access Security Gateway
To restart temporarily disabled access security gateway access for login:
1. Type
change login xxxx
and press
RETURN,
where xxxx is the
alphanumeric login ID.
The
Login Administration
screen appears.
2. On the Access Security Gateway Login Administration page (page 2), set
the Blocked field to
n
.
3. Press
ENTER
to save your changes.
LOGIN ADMINISTRATION
Password of Login Making Change:
LOGIN BEING ADMINISTERED
Login’s Name:xxxxxxx
Login Type:
Service Level:
Disable Following a Security Violation?
Login’s Name:xxxxxxx
Login Type:
Service Level:
Disable Following a Security Violation?
Access to INADS Port? _
LOGIN’S PASSWORD INFORMATION
Login’s Password:
Reenter Login’s Password:
Login’s Password:
Reenter Login’s Password:
Password Aging Cycle Length (Days):
LOGOFF NOTIFICATION
Facility Test Call Notification? y
Acknowledgment Required? y
Remote Access Notification? y
Acknowledgment Required? y
ACCESS SECURITY GATEWAY PARAMETERS
Access Security Gateway? n
Access Security Gateway? n