Lucent Technologies 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing trunks
354
Setting up digital trunks
12
The following enhanced DS1 administration login permissions must be assigned
on the Command Permission Categories screen:
on the Command Permission Categories screen:
■
The Maintain Enhanced DS1 field must be
y
.
■
The Maintain Trunks field must be
y
.
■
The Maintain Switch Circuit Packs field must be
y
.
If you busy out the DS1 circuit pack, you can change the following fields: CRC,
Connect, Country Protocol, Framing Mode, Interface, Interconnect, Line Coding,
and Protocol Version. After changing these fields, you may also have to change
and resubmit associated screens.
Connect, Country Protocol, Framing Mode, Interface, Interconnect, Line Coding,
and Protocol Version. After changing these fields, you may also have to change
and resubmit associated screens.
Matching field settings on different screens
For enhanced DS1 administration, some field values on the DS1 Circuit Pack
screen must be consistent with those on other screens as shown in the table below.
If you change field values on the DS1 screen, you must change the related fields
on the other screens and resubmit them.
screen must be consistent with those on other screens as shown in the table below.
If you change field values on the DS1 screen, you must change the related fields
on the other screens and resubmit them.
Refer to DEFINITY ECS Administration for Network Connectivity for information
on the Signaling Group screen.
on the Signaling Group screen.
Specific combinations of settings for some of these fields are shown below.
DS1 Circuit Pack field
Affected screens
Line Coding
Route Pattern
Access Endpoint
PRI Endpoint
Signaling Group
Trunk Group
Connect Signaling
Group
Protocol Version
Signaling Group
Interface Signaling
Group
Interconnect
Trunk Group
Country
Protocol Signaling
Group
Trunk Group