Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Collecting billing information 

447

Receiving call-charge information 

2. In the CDR Reports field, type 

This ensures that the AOC information appears on the CDR report. 

3. Verify that Service Type is 

public-ntwrk.

4. In the Supplementary Service Protocol field, type 

5. The Charge Advice field, type 

end-on-request. 

This ensures that the switch will place one request for charge information. 
This reduces the amount of information passed to the switch and consumes 
less processor time than other options. 

6. Press 

ENTER

 to save your changes.

In this example, we will administer an existing DIOD trunk to receive PPM from 
the public network. 

1. Type 

change trunk-group 3. 

The 

Trunk Group

 screen appears with existing administration for this trunk 

group. 

 Page 1 of x

                                 TRUNK GROUP

 Group Number: 2

 

Group Type: isdn

  CDR Reports: y

   Group Name: OUTSIDE_CALL_______________ COR: 1_       TN: 1__      TAC: ____
    Direction: two-way_       Outgoing Display? n
  Dial Access? n                Busy Threshold: 99_         Night Service: ____
 Queue Length: 0__
 Service Type: public-ntwrk

 Auth Code? n            TestCall ITC: rest

Far End Test Line No: _______________

 TestCall BCC: 4
 TRUNK PARAMETERS
          Codeset to Send Display: 6     Codeset to Send TCM,Lookahead: 6
         Max Message Size to Send: 260   Charge Advice: none_____________
   Supplementary Service Protocol: a 

Digit Handling(in/out):enbloc/enbloc

             Trunk Hunt: cyclical 

QSIG Value-Added Lucent? n

      Connected to Toll? n      STT Loss: normal       DTT to DCO Loss: normal
 Calling Number - Delete: ___ Insert: _______________ Numbering Format: _______
               Bit Rate: 1200_        Synchronization: async    Duplex: full
  Disconnect Supervision - In? y  Out? n
  Answer Supervision Timeout: 0__