Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Screen reference 

761

ISDN trunk group 

Switching field is 

 on the System-Parameters Customer-Options screen. If set to 

, the Wideband Support Options page appears. All trunk members must be from 

TN464C (or later) circuit packs.

Wideband trunk calls are treated as a single trunk call when Automatic 
Circuit Assurance (ACA) measurements are taken. This way, if an ACA 
referral call is generated (for short or long holding time), the wideband call 
only triggers a single referral call using the lowest B-channel trunk member 
associated with the wideband channel.

The fields in this page show the priorities for each type of information to be 
forwarded in the Shared UUI. This page appears only on the ISDN trunk group 
screen when all of the following conditions are met:

■

The UUI IE Treatment field is 

.

■

The Supplementary Service Protocol field is set to anything except 

.

Changing the priorities in this screen may affect whether certain information will 
be sent. For more information about setting priorities, refer to “Information 
Forwarding” in DEFINITY ECS Guide to ACD Call Centers. These fields are 
unique to the ISDN trunk group screen.

User information from ASAI. Valid entries are 

 to 

 and blank. If blank, that 

field’s information is not forwarded.

add trunk-group next

Page y 

of x

SHARED UUI FEATURE PRIORITIES

ASAI: 1

Universal Call ID: 2

MULTI SITE ROUTING (MSR)

In-VDN Time: 3

VDN Name: 4

Collected Digits: 5

Other LAI Information: 6